Work Order Classification

Pump P-101A has a seal leak. Observed oil dripping from the mechanical seal area during routine inspection. Recommend replacing the mechanical seal assembly.

Abnormal bearing noise on pump P-102B. Grinding sound coming from the drive end bearing. Vibration readings elevated. Need to replace bearing.

Valve V-201 stuck in closed position. Tried manual override but valve won't respond. Suspect actuator issue or stem binding.

Motor M-401 tripped on overload. Reset breaker but motor trips again after 5 minutes. Motor feels hot to touch. Check insulation and current draw.

Flow transmitter FT-501 reading erratic. Output signal drifting. Calibration may be off. Need to verify against reference.

Heat exchanger E-301 showing reduced heat transfer. Outlet temperatures not meeting spec. Tubes may be fouled or plugged.